当前位置:主页 > 使用说明 >

耐负压橡胶接头制作要求以及性能特点

作者:上海松夏减震器有限公司 日期:2019-03-07 来源:橡胶接头厂家
   耐负压橡胶软接头要求很高,单纯的橡胶是耐不行负压的,比方方说管道内径是0.1kg的负压,橡胶管体就会吸扁,跟管道向外的压力是绝对不同的,所以,负压内径必须增加负压导流筒,简单的说,负压导流筒就是在橡胶接头的内径增加一个碳钢的管子,但是接头的内径要比原来的内径小了,有了负压导流筒,橡胶接头就不会被吸扁,这样橡胶接头原来的隔振、伸缩效果也不会影响,一受到影响的就是接头的内径稍稍变小。
  
Resistance to negative pressure high requirement of soft rubber joints, pure rubber is not negative pressure resistance, said fang fang, pipe diameter is 0.1 kg of negative pressure, the rubber hose body will absorb flat, it is absolutely different with that of the outward, so the negative pressure inside diameter must be increased negative pressure diversion cone, in short, the negative pressure diversion tube is in the inner diameter of the rubber joint increase a carbon steel pipe, but the inner diameter of the joint is smaller than the inner diameter of the original, with negative pressure diversion tube, rubber joint will not be flat, so that the rubber joint vibration isolation, expansion effect will not affect the original and the affected is the inner diameter of the joint is slightly smaller.
耐负压橡胶接头制作要求以及性能特点
  耐负压橡胶接头具有耐负压、弹性好、位移量大、平衡管道偏差、吸收振荡、下降噪音效果好、安装方便,还可以大大下降管道系统的震动和噪声,可从根本上解决各类管路的接口位移,轴向伸缩及不齐心度等问题,主要运用在抽水机出进口和电子管道以及尾矿管道中,在结构上同一样的橡胶接头产品有非常大的区别,相比于一样的橡胶接头,具有增压尽量照顾装置,担保橡胶接头在受到负压时不会吸扁,增压圈一样为钢制或者不锈钢。

  Negative pressure resistant rubber joint negative pressure resistance, good elasticity, large displacement, balance pipe deviation, absorption oscillation, decrease the noise effect is good, easy installation, can be dramatically reduced vibration and noise of pipeline system, can fundamentally solve all kinds of pipeline interface displacement, axial expansion, and the problem of work is mainly used in the pump inlet and electronic pipelines and tailings in the pipeline, in structure with the same rubber joint products have very big difference, as compared to the rubber joint, with pressure as far as possible to take care of the device, rubber joint guarantee under the negative pressure will not absorb flat, pressurization circle for steel or stainless steel.

耐负压橡胶接头性能特点

橡胶接头产品分类

  • 单球体橡胶接头

  • 双球体橡胶接头

  • 同心异径橡胶接头

  • 偏心异径橡胶接头

  • 卡箍橡胶接头

  • 螺纹丝扣橡胶接头

  • 90度橡胶弯头

  • 菱形法兰橡胶接头

  • 橡胶鸭嘴止回阀